Epson XP-8500_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en (requiere una conexión a Internet). 1 Unpack Protective material Note: • Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. • Do not throw away the protective material shown above. Tape this piece to the top of the ink cartridge holder when transporting your product. For more information, see the online User’s Guide . • The CD/DVD tray is stored in the bottom of cassette 2. 1 Remove all protective materials from the product. 2 Lift up the scanner unit. Remove all protective materials from inside the product. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product, then adjust the control panel. 3 Select your language. Note: • You can change this setting later using the product’s control panel. For more information, see the online User’s Guide . • f an error message appears, turn off the product and check that no protective material has been left inside the product. 3 Install ink cartridges 1 Lift up the scanner unit. Caution: Do not touch the flat, white cable or the print head path. 2 Unpack the ink cartridges. Caution: • Do not shake the ink cartridges. Do not touch the areas shown below. Doing so may prevent normal operation and printing. XP-8500 Small-in-One ® Printer
Page 1 of 4