Epson XP-820_Start-Here—Installation-Guide_pdf

Start Here 1 Read these instructions before using your product. The illustrations show the XP-820, but the steps are the same for the XP-520 and XP-620. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en epson.com/support/xp520sp , epson.com/support/xp620sp o epson.com/support/xp820sp (requiere una conexión a Internet). 2 3 Unpack Turn on and configure 4 Load paper Install ink cartridges Select your language, country, date, and time if applicable. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. XP-520/XP-620/XP-820 Small-in-One ® Printer Caution: Do not connect to your computer yet. Shake the BK (black) cartridge only. Insert the cartridges at a slight angle as shown. Select the paper settings on the product’s control panel. English Note: The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for priming, the rest is available for printing. Caution: Don’t turn off the printer or raise the scanner unit while the printer is priming or you’ll waste ink. 2 1 2 1 1 2 Note: Store the caps in the included plastic bag. Use them to recap the ink cartridges after removing them for storage or disposal.
Page 1 of 4