Epson XP-7100_Start-Here—Installation-Guide_pdf

Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide . 1 Unpack Ink cap storage bag Note: • Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. • The CD/DVD tray is stored underneath cassette 2. 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials from inside the product. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product, then adjust the control panel. 3 Select your language . Note: You can change the language later using the product’s control panel. For more information, see the online User’s Guide . • f an error message appears, turn off the product and check that no protective material has been left inside the product. 3 Install ink cartridges Caution: Keep the ink cartridges out the reach of children and do not drink the ink. 1 Lift up the scanner unit until it locks into place. Caution: Do not touch the flat, white cable. 2 Gently shake the Black (BK) ink cartridge. Do not shake the Photo Black (PB) or other ink cartridges. 3 Unpack the ink cartridges. XP-7100 Small-in-One ® Printer XP7100_SH_E_CPD55769.indd 1
Page 1 of 4