Epson XP-630_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. The illustrations show the XP-830, but the steps are the same for the XP-530 and XP-630. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en , o (requiere una conexión a Internet). 1 Unpack (XP-630/XP-830) Note: • Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. • The CD/DVD tray is taped to the bottom of cassette 2. 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product, then adjust the control panel. 3 Select these settings: XP-530/XP-630: Language XP-830: Language, country, date, and time Note: • You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . • f an error message appears, turn off the product and check that no protective material has been left inside the product. 3 Install ink cartridges 1 Lift up the scanner unit. Caution: Do not touch the flat, white cable. XP-530/XP-630/XP-830 Small-in-One ® Printer
Page 1 of 4