Epson XP-6100_Start-Here—Installation-Guide_pdf

Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide . Note: This printer is designed for use with Epson ® cartridges only, not third-party cartridges or ink. For important ink information, visit (U.S.) or (Canada) or see your printer box. 1 Unpack Protective paper Note: • Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. • Do not throw away the protective paper located inside the ink cartridge holder. Tape this piece to the top of the ink cartridge holder when transporting your product. For more information, see the online User’s Guide . • The CD/DVD tray is stored underneath cassette 2. 1 Remove all protective materials from the product. 2 Lift up the scanner unit. Remove all protective materials from inside the product. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product, then adjust the control panel. 3 Select your language. Note: • You can change this setting later using the product’s control panel. For more information, see the online User’s Guide . • f an error message appears, turn off the product and check that no protective material has been left inside the product. 3 nstall ink cartridges Caution: Keep the ink cartridges out the reach of children and do not drink the ink. Note: The included initial cartridges are designed for reliable printer setup and cannot be used as replacement cartridges or resold. After setup, the remaining ink is available for printing. 1 Lift up the scanner unit. Caution: Do not touch the flat white cable or the print head path. XP-6100 Small-in-One ® Printer
Page 1 of 4