Epson XP-434_Start-Here—Installation-Guide_pdf

Start Here 1 Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en , o (requiere una conexión a Internet). 2 3 Unpack Turn on and configure 4 Load paper Install ink cartridges To select English as your language, press OK . If you want to change the language, press it, then press OK . or to select Note: You can change the language later using the product’s control panel. For more information, see the online User’s Guide . Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. XP-330/XP-430/XP-434 Small-in-One ® Printer English Caution: Do not lower the control panel without first squeezing the release bar underneath or you may damage the product. 1 2 Press about 4 minutes. to prime the ink delivery system. Priming takes Note: The printer is designed for use with Epson ® cartridges only, not third-party cartridges or ink. The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for priming, the rest is available for printing. Caution: Don’t turn off the printer while it is priming or you’ll waste ink. 2 1 3 4 2 1 8½ × 11 inch (216 × 279 mm) 4 × 6 inch (102 × 152 mm) 4 minutes Check the current paper settings on the control panel. To use these settings, press OK . If you want to change the settings, press to select Change , then press OK . Select paper size, press OK , select paper type, then press OK to confirm settings. or Caution: Do not connect to your computer yet. 2 1 1 2
Page 1 of 4