Epson XP-400_Start-Here—Installation-Guide_pdf

Read these instructions before using your product. 1 Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials, including from inside the printer. 2 Turn on and adjust 1 Raise the paper support, then connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Raise the control panel, then press the power button. Note: If you want to lower the control panel, squeeze the release bar underneath. Caution: Do not lower the control panel without first squeezing the release bar underneath or you may damage the product. 3 To select English as your language, press OK . f you want to change the language, press press OK . or to select it, then Note: You can change the language later using the product’s control panel. For more information, see the online User’s Guide . 3 Install ink cartridges Note: Don’t load paper yet. 1 Lift up the scanner unit, and wait until the ink cartridge holder stops moving. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. 4 nsert the cartridges in the holder for each color, and press each cartridge down until it clicks. XP-400 Small-in-One Printer Start Here
Page 1 of 4