Epson WorkForce WF-7510_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. 1 Unpack French control panel stickers Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Note: These illustrations show the WF-7520, but the instructions are the same for the WF-7510 unless otherwise noted. Remove all protective materials. Caution: Do not remove the plastic strip as shown. It is part of the Automatic Document Feeder. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Squeeze the release bar underneath to raise the control panel. Then press the On button. Note: If you want to lower the control panel, squeeze the release bar underneath . Caution: To avoid damaging the printer, make sure you squeeze the release bar to lower the control panel. Don’t try to push it down without releasing it. 3 Select settings 1 To select English as your language, press OK . f you want to change the language, press select it, then press OK . or to 2 Select your country/region and press OK . 3 Select your Daylight Saving Time setting ( Winter/ Summer ), and press OK . 4 Select the date format and press OK . 5 Press the number keys to enter the date and press OK . 6 Select the time format ( 12h or 24h ) and press OK . 7 Press the number keys to enter the time. Then press or to select AM or PM , if necessary. 8 Press OK . Note: You can change the date and time settings using the printer’s control panel. For more information, see the online User’s Guide . 4 Install ink cartridges 1 Lift up the scanner unit. *412201800* *412201800*
Page 1 of 4