Epson WorkForce WF-3540_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en (requiere una conexión a Internet). 1 Unpack Copy/ Fax/ Scan/ French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select settings 1 Select your language and country. Touch the screen to select the desired option. 2 Select Summer if Daylight Saving Time is in effect; otherwise, select Winter . 3 Select the date format. 4 Use the numeric keypad to set the date, then press Done . 5 Select 12h ( AM / PM ) or 24h . 6 Use the numeric keypad to set the time. 7 Press Done . Note: You can change the date and time settings using the product’s control panel. For more information, see the online User’s Guide . 4 Install ink cartridges 1 Lift the scanner unit. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. *412334000* *412334000* WF-3540
Page 1 of 4