Epson WorkForce WF-3520_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en (requiere una conexión a Internet). 1 Unpack Copy/ Fax/ Scan/ French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select settings 1 To select English as your language, press OK . If you want to change the language, press press OK . or to select it, then 2 Select your country/region and press OK . 3 Select Summer if Daylight Saving Time is in effect; otherwise, select Winter . Press OK . 4 Select the date format and press OK . 5 Press the number keys to enter the date and press OK . 6 Select 12h (AM/PM) or 24h and press OK . 7 Press the number keys to enter the time. Then select AM or PM . 8 Press OK . Note: You can change the time and date settings using the product’s control panel. For more information, see the online User’s Guide . 4 Install ink cartridges 1 Lift the scanner unit. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. *412331000* *412331000* WF-3520
Page 1 of 4