Epson WorkForce WF-2750_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. The illustrations show the WF-2750, but the steps are the same for the WF-2760. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en www.epson.com/support/wf2750sp o www.epson.com/support/wf2760sp (requiere una conexión a Inernet). 1 Unpack French control panel stickers Note: Do not open the ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials from inside the product. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product. 3 Select your language, country, date, and time. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . 3 Install ink cartridges 1 Lift up the scanner unit. Caution: Do not touch the flat, white cable. 2 Gently shake the ink cartridges. 3 Unpack the ink cartridges. *413163100* *413163100* WF-2750/WF-2760
Page 1 of 4