Epson WorkForce WF-2540_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, consulte la Guía de instalación en (requiere una conexión a Internet). 1 Unpack French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials, including from inside the printer. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select settings 1 To select English as your language, press OK . f you want to change the language, press select it, then press OK . or to 2 Select your country/region and press OK . 3 Select Summer if Daylight Saving Time is in effect; otherwise, select Winter . Press OK . 4 Select the date format and press OK . 5 Press the number keys to enter the date and press OK . 6 Select the time format ( 12h or 24h ) and press OK . 7 Press the number keys to enter the time. Then press or to select AM or PM , if necessary. 8 Press OK . Note: You can change the date and time settings using the printer’s control panel. For more information, see the online User’s Guide . 4 Install ink cartridges 1 Lift up the scanner unit. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. Caution: Don’t touch the green chip or small window on any cartridge. 3 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. *412493400* *412493400* WF-2540
Page 1 of 4

Leave a Reply