Epson WorkForce Pro WP-4533_Start-Here_pdf

Start Here Read these instructions before using your product. 1 Unpack French control panel sticker Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all tape and protective materials, including the foam and plastic inside the printer. 2 Turn on 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the power button. 3 Select settings 1 To select English as your language, press OK . f you want to change the language, select it and press OK . 2 Select your country and press OK . 3 Select Summer if Daylight Saving Time is in effect (spring through summer); otherwise, select Winter . Press OK . 4 Select the date format and press OK . 5 Use the numeric keypad to set the date and press OK . 6 Select 12h ( AM / PM ) or 24h and press OK . 7 Use the numeric keypad to set the time and press OK . Note: You can change the date and time settings by pressing Setup, selecting Printer Setup , then selecting Date/Time . 4 Install ink cartridges 1 Open the front cover. 2 Unpack the four ink cartridges. 3 Shake each cartridge as shown for about 5 seconds. 4 nstall each cartridge in the correct slot for its color. Push each cartridge in until it clicks. 5 Close the front cover. The printer starts priming the ink. This takes about 12 minutes. When you see a confirmation message on the product’s LCD screen, priming is complete. *412238200* *412238200* WorkForce ® Pro WP-4533 Series
Page 1 of 4

Leave a Reply