Epson WorkForce Pro WF-R5690_Start-Here—Installation-Guide_pdf

Start Here 1 Unpack Read these instructions before using your product. 4 Load paper WF-R5690 Select the paper settings on the product’s control panel. 3 Turn on and configure Select your language, country, date, and time. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . Shake 20 times. Unpack the black ink pack. Press to release the ink pack holder. Ink priming begins. Caution: Don’t open the front cover or ink pack covers or turn off the product while it is priming. Otherwise, you’ll waste ink. Caution: Do not connect to your computer yet. LTR English 2 Install ink supply units (ink packs) Place the ink pack on the holder. Press in the handle. Follow the same steps to install the 3 color ink packs on the other side of the printer. Note: • The printer is designed for use with Epson ® ink packs only, not third-party ink. • The ink packs included with the product are designed for product setup and not for resale. After some ink is used for priming, the rest is available for printing. Warning: The product is heavy and should be lifted and moved by two people. French control panel stickers
Page 1 of 4

Leave a Reply