Epson WorkForce Pro WF-M5799_Start-Here—Installation-Guide-for-Latin-America_pdf

Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide . Note: This printer is designed for use with Epson ® ink packs only, not third-party ink. For important ink information, visit or see your printer box. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: • Do not use the Epson product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a telephone to report a gas leak in the vicinity of the leak. Caution: To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord. 1 Unpack Warning: The product is heavy and should be lifted and moved by two people. 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials from inside the product, then close the scanner unit. 3 nsert the output tray, then set it down gently. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product. 3 Select your language, country, and time on the LCD screen. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . 3 nstall ink supply unit (ink pack) Note: The included initial ink pack is designed for reliable printer setup and cannot be used as a replacement pack or resold. After setup, the remaining ink is available for printing. Caution: Keep ink packs out of the reach of children and do not drink the ink. 1 Unlock and open the ink pack tray cover, then remove the packing material. WF-M5799
Page 1 of 4

Leave a Reply