Epson WorkForce Pro WF-M5799_Administrator-s-Guide_pdf

57 Pre-Shared Key was Forgotten Cannot Communicate with the Product Using IPsec Communication Communication was Working, but Stopped Cannot Create the Secure IPP Printing Port Cannot Connect After Configuring IPsec/IP Filtering Cannot Access the Product After Configuring IEEE 802.1X Parent topic: Solving Problems Pre-Shared Key was Forgotten If you forget a pre-shared key, change the key using Web Config for the default or group policy. Parent topic: Solving Network Security Problems Cannot Communicate with the Product Using IPsec Communication Make sure your computer is using one of these supported algorithms for communicating with the product: Security method Supported algorithms IKE encryption algorithm AES-CBC-128, AES-CBC-192, AES-CBC-256, AES-GCM-128*, AES- GCM-192*, AES-GCM-256*, 3DES IKE authentication algorithm SHA-1, SHA-256, SHA-384, SHA-512, MD5 IKE key exchange algorithm DH Group1, DH Group2, DH Group5, DH Group14, DH Group15, DH Group16, DH Group17, DH Group18, DH Group19, DH Group20, DH Group21, DH Group22, DH Group23, DH Group24, DH Group25, DH Group26, DH Group27*, DH Group28*, DH Group29*, DH Group30* ESP encryption algorithm AES-CBC-128, AES-CBC-192, AES-CBC-256, AES-GCM-128, AES- GCM-192, AES-GCM-256, 3DES ESP authentication algorithm SHA-1, SHA-256, SHA-384, SHA-512, MD5 AH authentication algorithm * Available for IKEv2 only Parent topic: Solving Network Security Problems
Page 57 of 63

Leave a Reply