Epson WorkForce Pro WF-M5799_Administrator-s-Guide_pdf

52 Using EpsonNet Config Network Configuration Software Follow the instructions in these sections to configure your product's administrator network settings using the EpsonNet Config software. With Windows, you can configure network settings in a batch operation. See the EpsonNet Config help utility for instructions. Note: Before you can configure system administration settings, connect the product to a network. See the product's User's Guide for instructions. Installing EpsonNet Config Configuring a Product IP Address Using EpsonNet Config Installing EpsonNet Config To install EpsonNet Config, download the software from the product's support page at epson.com/support (U.S.), epson.ca/support (Canada), or epson.com.jm/support (Caribbean) and follow the on-screen instructions. Parent topic: Using EpsonNet Config Network Configuration Software Configuring a Product IP Address Using EpsonNet Config You can configure the product's IP address using EpsonNet Config. 1. Turn on the product. 2. Connect the product to a network using an Ethernet cable. 3. Do one of the following to start EpsonNet Config: Windows 10 : Click Windows 8.x : Navigate to the Apps screen and select EpsonNet > EpsonNet Config . > All Apps > EpsonNet > EpsonNet Config . Windows (other versions) : Click EpsonNet > EpsonNet Config . Mac : Open the Applications folder, open the Epson Software folder, and select EpsonNet > EpsonNet Config > EpsonNet Config . After a few moments, the program displays the connected products. or Start and select All Programs or Programs . Select
Page 52 of 63

Leave a Reply