Epson WorkForce Pro WF-M5799_Administrator-s-Guide_pdf

22 Setting Options/Description Encapsulation If you selected IPsec as the Access Control option, select one of these encapsulation modes: Transport Mode : if you are using the product on the same LAN; IP packets of layer 4 or later are encrypted Tunnel Mode : if you are using the product on an Internet-capable network, such as IPsec-VPN; the header and data of IP packets are encrypted Remote Gateway(Tunnel Mode) If you selected Tunnel Mode as the Encapsulation option, enter a gateway address between 1 and 39 characters long Security Protocol If you selected IPsec as the Access Control option, select one of these security protocols: ESP : to ensure the integrity of authentication and data, and encrypt data AH : to ensure the integrity of authentication and data; if data encryption is prohibited, you can use IPsec Group Policy Guidelines Service name Protocol type Local/Remote port number Controls these operations ENPC UDP 3289/Any port Searching for a product from applications such as printer or scanner drivers, or EpsonNet Config SNMP UDP 161/Any port Acquiring and configuring MIB from applications such as printer or scanner drivers, or EpsonNet Config LPR TCP 515/Any port Forwarding LPR data RAW (Port9100) TCP 9100/any port Forwarding RAW data IPP/IPPS TCP 631/Any port Forwarding AirPrint data (IPP/IPPS printing)
Page 22 of 63

Leave a Reply