Epson WorkForce Pro WF-M5799_Administrator-s-Guide_pdf

21 Setting Options/Description Transport Protocol If you selected Port Number as the Method of Choosing Port option, select one of these encapsulation modes: Any Protocol TCP UDP ICMPv4 See the Group Policy Guidelines table for more information Local Port If you selected Port Number as the Method of Choosing Port option, and TCP or UDP for the Transport Protocol option, enter the port numbers that control receiving packets (up to 10 ports), separated by commas, for example 25,80,143,5220 ; leave this setting blank to control all ports; see the next table for more information Remote Port If you selected Port Number as the Method of Choosing Port option, and TCP or UDP for the Transport Protocol option, enter the port numbers that control sending packets (up to 10 ports), separated by commas, for example 25,80,143,5220 ; leave this setting blank to control all ports; see the next table for more information Authentication Method If you selected IPsec as the Access Control option, select an authentication method here Pre-Shared Key If you selected Pre-Shared Key as the Authentication Method option, enter a pre- shared key between 1 and 127 characters long here and in the Confirm Pre-Shared Key field
Page 21 of 63

Leave a Reply