Epson WorkForce Pro WF-C579R_Start-Here—Installation-Guide-for-U-S–and-Canada_pdf

Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide . Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury, including the following: • Do not use the Epson ® product near water. • Always keep this guide handy. • Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a telephone to report a gas leak in the vicinity of the leak. Caution: To reduce the risk of fire, use only a No. 26 AWG or larger telecommunication line cord. 1 Unpack French control panel sticker 1 Remove all protective materials from the product. 2 Lift up the scanner unit and remove all protective materials from inside the product, then close the scanner unit. 3 Place the product on the included paper cassette unit as shown. 4 Attach the included sticker. 5 Insert the output tray, then set it down gently. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Turn on the product. 3 Select your language, country, and time on the LCD screen. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . WF-C579R
Page 1 of 4

Leave a Reply