Epson WorkForce Pro WF-4730_Start-Here—Installation-Guide_pdf

Start Here Read these instructions before using your product. The illustrations show the WF-4740, but the steps are the same for all models, unless otherwise specified. Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de configuración en español, visite la página de soporte de su producto en (EE.UU.) o (Canadá) y consulte la Guía de instalación (requiere una conexión a Internet). 1 Unpack Note: Do not open the ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. 1 Remove all protective materials from the product. 2 Lift up the scanner unit until it locks and remove all protective materials from inside the product. 3 Lower the scanner unit. 2 Turn on and configure 1 Connect the power cord to the back of the product and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Raise the control panel and turn on the product. 3 Select your language, country, and time. Note: You can change these settings later using the product’s control panel. For more information, see the online User’s Guide . 3 Install ink cartridges Caution: Keep the ink cartridges out the reach of children and do not drink the ink. 1 Lift up the scanner unit until it locks. 2 Caution: Do not touch the flat, white cable. Gently shake the ink cartridges. 3 Unpack the ink cartridges. WF-3720/WF-4720/WF-4730/WF-4740 Series
Page 1 of 4

Leave a Reply