Epson WorkForce 635_Start-Here_pdf

Start Here Read these instructions before using your product. These instructions are for the WorkForce 630/632/633/635. 1 Unpack French control panel stickers (included for Canada only) Power cord Phone cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. Caution: Do not remove the plastic strip shown below. It is part of the Automatic Document Feeder. 2 Turn on 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Raise the control panel and press the On button. To lower the control panel, press the release bar underneath. 3 Select settings 1 To select English as your language, press OK . If you want to change the language, press select it, then press OK .) or to 2 Select your Country/Region and press OK . 3 Select On if Daylight Saving Time is in effect (spring through summer), otherwise select Off . Press OK . 4 Select the Date format and press OK . 5 Press the number keys to enter the Date and press OK . 6 Select the Time format ( 12h or 24h ) and press OK . 7 Press the number keys to enter the Time . Then press or to select AM or PM , if necessary. 8 Press OK . 4 Install ink cartridges 1 Lift up the scanner. *411856600* *411856600* WorkForce ® 630 Series
Page 1 of 4