Epson Stylus Scan 2000_Quick-Start_pdf

Attach the paper and document supports Make sure you check the system and location requirements and follow all the safety instructions in your User’s Guide. Plug the printer into a properly grounded outlet. If you need help in setting up your printer, see “Solving Problems” in your User’s Guide. CAUTION Remove any tape and packing materials. Make sure you have all the parts. If any parts are missing, contact EPSON as described in your User’s Guide . You’ll also need a cable to connect the printer to your computer. start here Unpack your EPSON Stylus Scan Plug in your EPSON Stylus Scan 3 4 2 Install the ink cartridges Install the ink cartridges (continued) 1. Lower the tray. 3. Press the power button. The lights come on and the print head moves. 4. Lift up the clamp. 2. Open the front cover. 5. Unwrap the ink cartridges. Then pull off only the yellow part of the tape seal on top. Don’t pull off the blue portion or remove the clear seal on the bottom of the cartridge. 1 u u n n f f o o l l d d turn here document support paper support Guide software printer protection sheet ink cartridges If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children. WARNING Continue at the top of the next column. paper support document support
Page 1 of 4

Leave a Reply