Epson Stylus NX625_Start-Here_pdf

Start Here Read these instructions before using your product. 1 Unpack French control panel stickers Power cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on and adjust 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Press the On button, then raise the control panel. To lower the control panel, press the release bar underneath and push the control panel down. Caution: To avoid damaging your Epson Stylus NX620/625 Series, always press the release bar to lower the control panel. 3 Select language To select English as your language, press OK . Note: If you want to change the language, press then press OK . or to select it, 4 Install ink cartridges 1 Lift up the scanner, then open the cartridge cover. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. *411835000* *411835000* Epson Stylus ® NX620/625 Series
Page 1 of 4

Leave a Reply