Epson Stylus NX530_Start-Here_pdf

Start Here Read these instructions before using your product. 1 Unpack French control panel stickers Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on and adjust 1 Connect the power cord to the back of the printer and to an electrical outlet. Caution: Do not connect to your computer yet. 2 Press the On button, then raise the control panel. Note: If you want to lower the control panel, squeeze the release bar underneath and push the control panel down. Caution: To avoid damaging your product, always squeeze the release bar to lower the control panel. *412184600* *412184600* 3 Select language Press or to select your language, then press OK . 4 Install ink cartridges 1 Lift up the scanner unit. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. 5 Insert the cartridges in the holder for each color. Epson Stylus ® NX530
Page 1 of 4

Leave a Reply