Epson Stylus NX420_Start-Here_pdf

Start Here Read these instructions before using your product. 1 Unpack French control panel stickers (included for Canada only) Power cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Press the On button. 3 Select language 1 To select English as your language, press Start . Note: If you want to change the language, press select it, then press or to Start . 4 Install ink cartridges Note: Do not load paper yet. 1 Lift up the scanner, then open the cartridge cover. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. *411841500* *411841500* Epson Stylus ® NX420 Series
Page 1 of 4

Leave a Reply