Epson Stylus NX300_Start-Here_pdf

Start Here Read these instructions before using your product. 1 Unpack USB cable Power cord Caution: Do not open the ink cartridge package until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all protective materials. 2 Turn on 1 Connect the power cable. Caution: Do not connect to your computer yet. 2 Press the On button. 3 Make settings CleStop/ B & W Color /Fax 1 Press or to select your language, then press OK . 2 Press OK . or to select your country or region, then press 3 Press Saving Time and it’s currently in effect. (DST is effective from spring through summer.) Otherwise select Winter to turn off the setting. or to select Summer if your region uses Daylight 4 Press OK . 5 Press or to select the date format, then press OK . 6 Use the numeric keypad to change the date, then press OK . 7 Press then press OK . or to select a 12-hour or 24-hour time format, 8 Use the numeric keypad to set the time. f you chose a 12-hour time format, press AM or PM . or to select 9 Press OK . 4 Install ink cartridges 1 Lift up the scanner. 2 Open the cartridge cover. Epson Stylus ® NX300/305 Series *411852500* *411852500*
Page 1 of 4

Leave a Reply