Epson-FX-1170_Product-Information-Guide_pdf

FX-870/1170 guide printer release paper-tension unit ribbon cartridge nlet Note: The power cord is attached. Printer Specifications Printing method: 9-pin impact dot matrix Printing speed: Type of letters High-speed draft Draft pica Draft elite Condensed draft pica Emphasized normal pica Notes: 1) The printing speed for high speed draft is reduced to the value in with thick paper (over 0.18 mm). 2) The printing speed for high speed draft is reduced to the value of pica” when any graphic character is in the line. 3) The printing speed for draft is reduced to the value in when any italic character is in the line. 4) The speed for high duty printing is reduced to approximately speed, except for the printing speed in Print speed 380 285 342 243 (320) pica of each Printing direction: Bidirectional for text Unidirectional for graphics Line spacing: or programmable in increments of Paper-feed speed: Friction: 69 Tractor: 77 Continuous at at line spacing line spacing 3.7 inches per second Buffer: 24 KB or 0 KB (Selectable in the default setting mode) Printable columns: Draft, Epson Roman, or Epson in normal or condensed mode. You can also select other font/ pitch combinations using commands. Serif Character tables Mode): Europe: One italic and 15 graphic character tables One italic and 7 graphic character tables One italic and 5 graphic character tables 13 character sets Character tables Emulation): 2 Character tables Symbol sets Paper Single sheets (top insertion): Width 257 mm (5.8 to 10.1 inches) for standard 148 to 420 mm (5.8 to 16.5 inches) for wide max. 364 mm (14.3 inches) Thickness 0.065 to 0.14 mm (0.0025 to 0.0055 inches) Weight 52.3 to 90 (14 to 24 lb) Single-sheet bad single sheet multi-part forms only into the front slot with the optional front sheet guide. Use carbonless multi-part forms only. Continuous paper: Width to 254 mm (4 to to mm (4 to 16 inches) for wide inches) for standard Copies Four sheets (one original plus up to three copies) Thickness 0.065 to 0.32 mm (0.0025 0.012 inch) for one sheet 0.12 to 0.32 mm (0.0047 to 0.012 inch) total Weight 52.3 to 82 40 to 58.2 multi-part forms (14 to 22 lb) for one sheet (12 to 15 lb) per sheet in Use carbonless multi-part forms only. 9-Pin Printers 10/13/92 FX-870/1170-1
Page 1 of 11