Epson AcuLaser CX11NF_Supplemental—Late-Breaking-Information_pdf

Setting Your AcuLaser CX11NF to Receive Faxes By default your Epson AcuLaser ® CX11NF is set to receive distinctive ring pattern telephone calls. This may prevent the AcuLaser CX11NF from receiving incoming faxes. If your AcuLaser CX11NF does not pick up a telephone or fax call, follow these steps to change the DRPD (Distinctive Ring Pattern Detection) setting: 1. Press the Setup button. The Setup light turns on and the LCD screen displays Setup Mode for a few seconds, and then changes to the Setup menu. 2. Press the d button twice to select Fax Settings . Then press the r button . 3. Press the d button twice to select Reception Settings . Then press the r button . 4. Press the d button three times to select DRPD . Then press the r button . 5. Press the u button to select ALL . Then press the r button . DRPD is set to ALL . 6. Press t he Setup button to exit the menu. Your telephone company can add a second telephone number to your main telephone line that will ring with a distinctive pattern. DRPD allows the AcuLaser CX11NF to distinguish between different ring patterns. When DRPD is set to NORMAL , the AcuLaser CX11NF will only answer the distinctive ring and ignore the one regular ring. © 2005 Epson America, Inc. 7/05 Printed in USA CPD-20347
Page 1 of 6

Leave a Reply